Hello there,
after a few years of being out of the hobby I am starting to get interested again after seeing that a lot of budget printers now are having all the features that my old one were missing. Direct extruder, auto bed leveling, dual z axis, stuff like that. So which one of the budget printers around 300€ would you guys suggest one should get to get started again? Elegoo Neptune 4? Creality Ender 3 V3? Anycubic Kobra 2? Sovol S06? There are so many good looking options that I am interested in your experiences and opinions. Thanks!
I’m happy with my Ender 3 Pro. I paid $200 but you can get it cheaper. I think there is a coupon sometimes for $100 at Micro Center. It’s common enough that replacement parts and upgrades (both printed and purchased) are readily available. Runs open source Marlin firmware and the design itself is also open source. Print quality is good for the price. For the price I’m OK with it not having direct extruder or dual Z axis, and adding auto bed leveling is easy enough with a BLTouch or CRTouch.
I grabbed a 3 v2 neo and it’s got all the upgrades already done.
If you told me you could buy a passable 3D printer for $200 when I started building my printers 15 years ago, I’d have laughed in your face.
Same. I put together a knock off Prusa i3 kit in 2014 that cost me like $600 and most of the parts were themselves 3D printed. Not a bad thing but they were really rough prints. It printed OK for the time but was an endless source of annoyance. In comparison, the Ender 3 Pro just basically worked out of the box with minor bed leveling tweaks and everything else has just been minor quality of life improvements. It’s great.
CLEAN IT UP JANNIES ON LEMMY SUCK COPE FLOYD SNEED’S SEED CITY SLICKER FOR FREE SEETHE JANNY FUCK FLOYD FLOYD COPE FOR FREE JANNIES ON LEMMY HOT POCKETS FOR FREE GUCCI LOAFERS PARK AVENUE MANICURE JANNY HOT POCKETS FOR FREE CLEAN IT UP GUCCI LOAFERS HOT POCKETS FEED PARK AVENUE MANICURE CLEAN IT UP COPE FOR FREE PARK AVENUE MANICURE AND SEETHE DILATE ON LEMMY FEED SEED SNEED SUCK SEED CHUCK CITY SLICKER SEED CHUCK DILATE PARK AVENUE MANICURE
SUCK JANNY SEED CITY SLICKER DILATE JANNY FOR FREE JANNY SNEED AND SEETHE SNEED’S SUCK JANNY JANNIES HOT POCKETS ON LEMMY SNEED’S SNEED HOT POCKETS CITY SLICKER I CAN’T JANNY DILATE FUCK GUCCI LOAFERS FOR FREE SEETHE FUCK SNEED PARK AVENUE MANICURE AND SNEED PARK AVENUE MANICURE SNEED’S I CAN’T AND DILATE FOR FREE CITY SLICKER SEED JANNIES FEED CITY SLICKER JANNY COPE JANNIES ON LEMMY JANNY FUCK
I have no experience with any of them, but I would give advantage to ender 3 v3 and sovol sv06 because they have smooth rods while neptune and kobra use wheels. You have to be ready to thinker, tune, upgrade and fix because you are buying super cheap bed slinger, but I guess you know that already. I dont know if you can get voron v0.2 kit for around 300€, but that might be beter investment if you are ok with smaller print volume.
I CAN’T SEETHE I CAN’T SEED CITY SLICKER SNEED I CAN’T DILATE JANNIES PARK AVENUE MANICURE HOT POCKETS CHUCK’S SUCK AND JANNY FLOYD CHUCK CHUCK SNEED CLEAN IT UP SEETHE FOR FREE FLOYD CITY SLICKER ON LEMMY HOT POCKETS SEETHE SUCK DILATE CLEAN IT UP PARK AVENUE MANICURE FANCY GERMAN CAR COPE ON LEMMY HOT POCKETS GUCCI LOAFERS JANNY DILATE FUCK CHUCK GUCCI LOAFERS I CAN’T CLEAN IT UP CHUCK’S DILATE CITY SLICKER FUCK HOT POCKETS PARK AVENUE MANICURE CHUCK
HOT POCKETS I CAN’T FEED FEED ON LEMMY JANNY CHUCK’S CHUCK ON LEMMY SEED FANCY GERMAN CAR SEETHE AND SEETHE HOT POCKETS COPE FANCY GERMAN CAR SEED COPE SUCK FANCY GERMAN CAR FEED COPE COPE FUCK CHUCK’S I CAN’T FEED CLEAN IT UP FOR FREE SUCK ON LEMMY FLOYD ON LEMMY SNEED’S ON LEMMY SNEED SNEED AND FLOYD DILATE CLEAN IT UP SUCK CHUCK’S FLOYD SNEED’S SEETHE GUCCI LOAFERS SNEED FLOYD
HOT POCKETS CLEAN IT UP FUCK CLEAN IT UP SNEED’S FOR FREE DILATE FUCK SNEED’S SEETHE SNEED FOR FREE SEED CITY SLICKER SNEED CITY SLICKER FLOYD DILATE JANNIES ON LEMMY ON LEMMY CITY SLICKER CHUCK’S I CAN’T COPE FLOYD CLEAN IT UP FUCK JANNIES SUCK AND CLEAN IT UP CLEAN IT UP CHUCK’S DILATE COPE SNEED’S ON LEMMY DILATE FLOYD SUCK SNEED SUCK SEED GUCCI LOAFERS FUCK PARK AVENUE MANICURE SNEED CITY SLICKER GUCCI LOAFERS
I CAN’T PARK AVENUE MANICURE SEED FANCY GERMAN CAR CITY SLICKER SEED PARK AVENUE MANICURE SNEED’S JANNIES CHUCK’S CITY SLICKER DILATE SEED CHUCK AND AND FEED JANNIES PARK AVENUE MANICURE JANNIES SEED JANNIES JANNIES JANNY HOT POCKETS SUCK JANNY DILATE ON LEMMY CHUCK JANNY CLEAN IT UP CHUCK’S JANNY SEED CLEAN IT UP ON LEMMY SEETHE CHUCK SUCK I CAN’T JANNIES HOT POCKETS SUCK SUCK JANNIES DILATE FOR FREE AND SNEED
FANCY GERMAN CAR FEED SNEED ON LEMMY FUCK SEED SNEED’S COPE GUCCI LOAFERS FANCY GERMAN CAR HOT POCKETS GUCCI LOAFERS AND FOR FREE CITY SLICKER FEED I CAN’T FOR FREE COPE SNEED’S JANNIES CHUCK SNEED’S SUCK CHUCK CHUCK’S SNEED SEETHE SEED FUCK GUCCI LOAFERS CHUCK’S FLOYD COPE CLEAN IT UP FEED FANCY GERMAN CAR SUCK FEED FANCY GERMAN CAR FANCY GERMAN CAR AND SEED PARK AVENUE MANICURE JANNIES AND GUCCI LOAFERS ON LEMMY DILATE SNEED’S
removed by mod
JANNY CLEAN IT UP GUCCI LOAFERS CHUCK ON LEMMY JANNIES CHUCK FOR FREE SEED CHUCK’S JANNIES FOR FREE SUCK FOR FREE CLEAN IT UP PARK AVENUE MANICURE AND GUCCI LOAFERS SUCK DILATE ON LEMMY FLOYD CHUCK’S COPE PARK AVENUE MANICURE FUCK FOR FREE FLOYD JANNY I CAN’T DILATE AND SEED FEED SNEED’S CHUCK SEETHE PARK AVENUE MANICURE DILATE FEED FEED JANNIES PARK AVENUE MANICURE AND CLEAN IT UP DILATE SUCK CHUCK’S FUCK FUCK
For your price, Ender 3 I guess but IMO, you should save up for a Prusa because you’ll eventually spend more upgrading the Ender anyways (that was my experience anyways, got a CR10s and spent twice as much upgrading it, but ended up getting an MK3S+ in the long run anyways).
I’ve always wondered where this comes from, the thought that a person would spend a huge amount to upgrade an Ender? I spent maybe $100 upgrading mine until I screwed up and fried my motherboard, but even adding the extra $60 for a decent upgrade I’ve still spent less than the original cost of the printer, and way WAY less than the cost of a Prusa. At this point the main upgrades include a direct drive and dual-Z to handle some NinjaFlex. I’ve always considered ABL a waste of money, and every other upgrade was just things I printed myself. You certainly can’t beat the reliability, I mean my printer has been sitting idle for nearly a year and I just fired it up a couple weeks ago to print some new items – no leveling or anything else, I just loaded up a spool of PLA and off it went. So what exactly are people spending these exorbitant amounts of money on for upgrades?
Partly, time is money but partly IDK, I’ve spent at least $200 upgrading mine with scaffold reinforcements, BL touch, a better hot end, and a few other QOL things and I’ve spent more on the CR10 than I did on the MK3S+ but it still doesn’t work as well as the Prusa. Granted, the print volume is bigger but I hardly ever print anything big enough to take advantage of it.
Agreed that time is money, and I’ve spent a fair amount of time on mine. I think the worst time-sink was after converting to direct drive and basically having to start from scratch on all my slicer settings, and then working out cable management to reclaim my Z height. At one point I was playing with faster speeds (thus the dual-Z upgrade) but eventually I want to switch to a 0.2mm nozzle and try to dial in miniatures (HO scale trains). I would be better off switching to a resin printer for that but I don’t have an option for good ventilation so that’s not really a consideration right now.
The issue is Crealty makes price point products. Maybe you get a good one or an OK one, a kind of bad one, or a dumpster fire. And there is no way to know what you are going to get, to get the results any one user is expecting - even if you consult Tarot Cards…And add in the total lack of support it can be more than a little bit of a gamble to buy.
My personal opinion is, if money is that tight that’s the best you can afford, then you can’t really afford cheap - let alone the ongoing costs of 3D printing, (upgrades, repairs, and filament ain’t free). And since it’s very often new users looking to get into the hobby, (which is great), they have no idea just what the learning curve is like when things go wrong. And how fussy it can be to make those failures go away. That shiny new cheap printer that provided that quick dopamine hit when you first unboxed it, can quickly become a point of never ending frustration and a bit of a money sink for a new user.
Overall, buy what you like. I’m certainly not paying for it. But not a lot of people have ever regretted the “Buy once, cry one” approach.
Hmm I know there used to be the issue with the aluminum beds being warped – mine is like that but was resolved with some layers of aluminum foil under the glass to flatten it out. And I do hear occasionally of someone getting a unit with an incorrectly cut rail length, but they’ve always just called Creality and gotten a replacement without any hassle. I haven’t heard of anyone having trouble with their customer service though, so I’m not sure what changed there, but that’s unfortunate that you had trouble with them.
I do agree about the hit-or-miss quality though. My own experience was the first glass bed I got from them was absolutely fantastic, nothing else beats the adhesion I had there. Then after a few years when the coating wore out I ordered a new one from them… and nothing will stick to that bed without using hairspray/glue/etc, so what’s the point? I finally settled on a slab of G10 with a PEI sticker which has worked well, but just the fact that the two glass beds which should have been identical says a lot about their quality control. I would say anyone getting an order from them should not expect a working machine right out of the box, however replacement parts have been easy to obtain for most people. And since you have to assemble these yourself, you definitely need to pay close attention to the online videos (I used the one from Tomb of 3D Horrors) to make sure everything is properly squared up, otherwise you’ll have nothing but trouble if you just slap them together.
I got a Sovol SV06 Plus and during the time I left it stock, it was excellent out of the box. I have started tinkering /upgrading and it is even better now (when it decides we are on speaking terms, lol).
Ender 3 v3 KE has everything you’d want
Or Bambu A1 mini lose surface but get to steer it from your phone
I would say it depends on where you get joy from in the hobby. I like working on my printer and making it better, so I’d buy a low end model and upgrade it. If that’s not your jam, I would recommend a Prusa or Bambu. I have no experience with them, but I hear good things. I bought a biqu B1 and added upgrades myself. I’ve had days where I wanna pull my hair out, but I have somehow enjoyed the challenge.
And that can be a very valid reason to enjoy the hobby.
